PWG Steering Committee Minutes * 23 April 2018

Attendees

Smith Kennedy (HP Inc, PWG Chair)
Ira McDonald (High North, PWG Secretary, IPP WG Co-Chair)

Preface

This meeting was announced and chaired by Smith Kennedy.

These minutes were prepared by Ira McDonald with much help from Smith Kennedy.

Agenda

(0) Agenda bashing, IP Policy, minute taker

- Review agenda and state PWG IP Policy
  - Ira McDonald as minute taker

- Revised Agenda:

  (1) Administrivia
  (2) PWG GitHub License Move to Apache v2 - Status
  (3) GDPR and PWG Operations (Smith / Jessica / Mike)
  (4) Responding to ask for blog posting on IPP 3D
  (5) IPP 3D 1.1 and May 2018 F2F
  (6) PWG Liaison agreement with ASTM
  (7) PWG at Additive Manufacturing Standardization Forum, April 24
  (8) May F2F Planning
  (9) Next SC meetings

(1) Administrivia
http://ftp.pwg.org/pub/pwg/general/sc/pwg-sc-call-minutes-20180409.htm

- IPR declaration
- Roll call
- Review minutes of SC (9 April) meeting
  - Approved as posted

(2) PWG GitHub License Move to Apache v2?

- Discussion
  - Smith has made no progress on this...

(3) GDPR and PWG Operations (Smith / Jessica)
```
- Discussion
  - Awaiting proposal from Jessica / ISTO
```
ACTION: Smith to follow up with Jessica on ISTO proposal for GDPR and PWG Operations
- OPEN

(4) Responding to ask for blog posting on IPP 3D

- Discussion
  - Paul is going to suggest to the person who contacted us that we promote
    PWG participation at RAPID + TCT event as the subject for the next article

(5) IPP 3D 1.1 and May 2018 F2F (Smith)

- Discussion
  - Mike issued a white paper on Safe G-Code

  - Met with Kris Iverson (MS) and Kurt Hunter (MS) on April 12 and April 19
    - Some feedback from Kris and Kurt on a couple of the Safe G-Code drafts

  - Safe G-Code whitepaper will be reviewed in IPP WG this week

  - Interest from Matthew Fiedler from re3D (*large* 3D Printer manufacturer)

(6) PWG Liaison agreement with ASTM

- Discussion
  - Paul will speak with Pat from ASTM tomorrow at Additive Manufacturing 
    Standardization Forum tomorrow about this

(7) PWG at Additive Manufacturing Standardization Forum on 24 April

- Discussion
  - Paul traveling there today

  - Paul will send a summary to SC by end of week

(8) May F2F Planning

- Discussion
  - SurveyMonkey poll had closed but has been re-opened

  - Why close the poll? 

  - Why not just leave poll open until the F2F itself but put a "soft" 
    closure on that for refreshments / food

ACTION: Smith to re-open May F2F poll until 05/15/18
- OPEN

(9) Next SC meetings
http://ftp.pwg.org/pub/pwg/general/sc

- SC - Monday 7 May 11am Pacific / 2pm Eastern
  - review Plenary slides

- Plenary - Tuesday 15 May 9am Pacific / 12pm Eastern
  - regular topics

- SC - Monday 21 May 11am Pacific / 2pm Eastern
  - post-F2F actions and postmortem and initial planning for next F2Fs

Previous Action Items

ACTION: Ira to document OID arc usage in PWG
- OPEN - pwg-mib-numbers-20091220.txt
- "arc" is any single value (often least-significant) in an OID - Existing plain text PWG policy and registry for each PWG MIB base OID - IBM gave PWG a permanent arc for LDAP OIDs for Print Schema (RFC 7612)
- LDAP OIDs to be documented in a additional policy and registry in ".../process/"
ACTION: Ira to update "pwg-namespace-policy-20060112.txt" - add "white" prefix and update project and document lifecycles
- IN PROGRESS - pwg-namespace-policy-20160820.txt is first draft
ACTION: Smith/Ira to write job descriptions for PWG Chair, PWG Vice-Chair, and PWG Secretary
- IN PROGRESS - should result into a new policy document (eventually plain text but start with MS Word working drafts)
- Smith sent initial draft to Ira - Ira proofed and posted for SC review - feedback from Bill requesting more details on the specific responsibilities of each officer - next draft out soon?
ACTION: Ira and Alan work w/ Anne Price to develop a joint TCG/PWG demo of HCD-TNC profile in a Printer with a Router or OS evaluating the Printer Health
- OPEN
ACTION: Smith/Mike/Ira/anybody to draft whitepaper on late binding for best fidelity in Cloud servers, intent vs. process for output fidelity, and the fundamental design ethos of the PWG's work
- OPEN
- perhaps have as a topic for the August F2F to enumerate core set of concepts with which to construct an outline for the document
- Smith to add discussion of this late binding for the future F2F Plenary
ACTION: Smith to send out screen captures of Wireshark before / after updates to IPP mailing list
- IN PROGRESS - Smith sent note about Wireshark IPP commit status on 06/01
ACTION: Smith to write an outline of the structure of Process 4.0 for SC review
- OPEN
ACTION: Smith to reach out to the two HP members of ISO US national body on 3D Printing and Scanning and discuss PWG's offerings in this space and Paul Tykodi's presence on the team as a representative of the PWG
- OPEN
ACTION: Smith to request SC review of pwg-namespace-policy-20160820.txt before an SC meeting
- OPEN
ACTION: Smith to reach out to the 3MF officers to work on co-branding and PWG collaboration
- IN PROGRESS - Smith is working on this 05/25/17
- Smith reached out to 3MF Consortium officers about logo usage, not complete yet - Smith to check in with Adrian about 3MF and PWG co-branding - PWG members prototyping 3MF file with PWG PJT with IPP 3D attributes embedded and we will review this prototype at the August F2F
ACTION: Smith to ask PWG Webmaster to improve the SEO / searchability of our website from well-known search engines (low priority)
- OPEN
ACTION: Smith to follow up with Anne Price about press releases for IPP/1.1 (RFC 8010 / 8011), IPP 3D Print, IPP Finishings/2.1, and IPP Everywhere with certified products
- OPEN
ACTION: Smith / Ira to ask Till if he can get an updated IPP Everywhere logo on the Linux Foundation OpenPrinting page (the fixed logo with ™)
- IN PROGRESS - Smith, Ira, and Till are exchanging emails
ACTION: Smith to ask Jane how he can converse directly with the lawyer doing the filing to check on IPP Everywhere trademark. If that doesn't work, plan is to move to a "™" on the "IPP Everywhere™" icon / trademark listing and then wait for a suitable "specimen of use" to appear
- IN PROGRESS
ACTION: Paul to write back to his AWS contact a discussion of what PWG is actually trying to do, and decide on an appropriate path forward, because it isn't clear that getting the PWG to have "advisor status" will help liaison
- OPEN
ACTION: Jessica to review Process 3.0 and the policy docs to make sure they are congruent with ISTO legal / bylaws, and also update for Process 4.0 so that our actions follow our process to a tee
- OPEN
ACTION: Smith / Ira to review earlier minutes and create thread on SC reflector about possible other collaboration ideas
OPEN
ACTION: Paul to reach out to Yu (P3030 Chair) about future IEEE P3030 meetings
- OPEN
ACTION: Smith to reach out to Yu (P3030 Chair) about meetings, and discuss P3030 hosting their own venue but in the same neighborhood as May PWG / OP F2F
- OPEN
ACTION: Smith to prepare Summer 2018 PWG update for Mopria
- OPEN
ACTION: Smith to ping Don Purpurea for PWG updated at future Mopria meeting
- OPEN
ACTION: Smith / Jessica to update "liaison agreement template" or create new "license agreement template" that would allow a partner to grant to PWG the right to use or reference content within - should this be created by the PWG or by the org that is granting the license?
- OPEN
ACTION: Once IEEE 1284 PAR is created, let the SC know so we can pull people in to join the WG and contribute to quorum, if nothing else
- OPEN
ACTION: Paul to draft summary of PWG 3D efforts for review by SC and Anne Price
- OPEN
ACTION: Jessica / Paul to check with Pat (ASTM) on resolution to how they can take PWG terms but still provide attribution
- OPEN
ACTION: Paul to send email to Pat (ASTM) and copy Jessica on a proposal for a path forward that has been discussed (targeted license agreement, etc.)
- OPEN
ACTION: Smith to reply to anonymous query about PWG members using "safe" email response
- OPEN
ACTION: Smith / Mike to update all other PWG GitHub projects to include new Apache v2 license
- OPEN
ACTION: Smith to coordinate with Paul to see IPP 3D blog posting is still an active topic
- OPEN
ACTION: Smith to notify P3030 leadership about BoF / IPP 3D 1.1 topics on F2F 3rd day
- OPEN