PWG-IMAGING-SYSTEM-MIB DEFINITIONS ::= BEGIN -- PWG Imaging System MIB version 0.20 - PROTOTYPE - 10 March 2004 -- NOTE: This MIB is a partial prototype at present - -- the Device and Device Attribute groups are missing -- and the Management group may be moved to a separate MIB IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Gauge32, Integer32, TimeTicks, enterprises FROM SNMPv2-SMI TEXTUAL-CONVENTION, DateAndTime, StorageType, TestAndIncr FROM SNMPv2-TC -- MODULE-COMPLIANCE, -- OBJECT-GROUP -- FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB; isMIB MODULE-IDENTITY LAST-UPDATED "0403100000Z" -- 10 March 2004 ORGANIZATION "IEEE/ISTO Printer Working Group" CONTACT-INFO "Web-based Imaging Management Service (WIMS) Project Web: http://www.pwg.org Email: wims@pwg.org Editor: Ira McDonald Postal: High North Inc 221 Ridge Ave Grand Marais, MI 49839 USA Tel: +1 906-494-2434 Email: imcdonald@sharplabs.com" DESCRIPTION "The MIB module for passive monitoring and (optional) management of the various services, devices, and resources configured on an Imaging System (including locally attached devices). Copyright (C) IEEE/ISTO PWG (2004)." -- revision history REVISION "0403100000Z" -- 10 March 2004 DESCRIPTION "Second version of the Imaging System MIB." REVISION "0402250000Z" -- 25 February 2004 DESCRIPTION "Original version of the Imaging System MIB." ::= { enterprises pwg(2699) mibs(1) imagingSystemMIB(999) } -- PWG Secretary - MIB module number should be assigned/registered isMIBObjects OBJECT IDENTIFIER ::= { isMIB 1 } isMIBNotifications OBJECT IDENTIFIER ::= { isMIB 2 } isMIBConformance OBJECT IDENTIFIER ::= { isMIB 3 } isMIBObjectClass OBJECT IDENTIFIER ::= { isMIBConformance 2 } -- -- Textual Conventions -- IsActionTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Type of management action now in progress or last completed on this Imaging System. Note: This list is limited to 255 entries, by the size of 'isSystemActionTypeSupport'." SYNTAX INTEGER { other(1), -- non-standard action unknown(2), -- unknown action type reserved(255) -- highest possible value } IsActionStatusTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Status of management action now in progress or last completed on this Imaging System. Note: This list is limited to 255 entries, by design." SYNTAX INTEGER { other(1), -- non-standard status unknown(2), -- unknown status type reserved(255) -- highest possible value } IsAlertSeverityLevelTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The level of severity of this IsAlertTable entry. The system determines the severity level assigned to each entry. Usage: See 'PrtAlertSeverityLevelTC' in Printer MIB v2 for the detailed semantics of these severity levels." REFERENCE "See: 'prtAlertSeverityLevel' in Printer MIB v2 (RFC 3805); 'PrtAlertSeverityLevelTC' in Printer MIB v2." SYNTAX INTEGER { other(1), -- unknown - omitted in Printer MIB v2 critical(3), warning(4), warningBinaryChangeEvent(5) -- New, not in RFC 1759 } IsAlertTrainingLevelTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The level of training required to correct the problem in this IsAlertTable entry (as determined by the Imaging System). Usage: See 'PrtAlertTrainingLevelTC' in IANA Printer MIB for the detailed semantics of these training levels." REFERENCE "See: 'prtAlertTrainingLevel' in Printer MIB v2 (RFC 3805); 'PrtAlertTrainingLevelTC' in IANA Printer MIB." SYNTAX INTEGER { other(1), unknown(2), untrained(3), trained(4), fieldService(5), management(6), noInterventionRequired(7) -- Not in RFC 1759 } IsObjectAttributeTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The attribute type (i.e., name and defined implicit value type) for this system, service, or device attribute. Usage: This list is grouped according to the system model from Printer MIB v1 (RFC 1759) and Printer MIB v2 (RFC 3805). Note: This list is limited to 2039 entries, by the size of 'isSystemAttributeTypeSupport'." REFERENCE "See: 'JmAttributeTypeTC' in Job Mon MIB (RFC 2707)." SYNTAX INTEGER { other(1), -- non-standard attribute unknown(2), -- unknown attribute type -- general attributes generalConfigChanges(51), -- INTEGER - counter -- total configuration changes on this managed object -- see 'prtGeneralConfigChanges' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) for usage generalCurrentOperator(52), -- STRING - localized -- current operator (responsible party and contact info) -- see 'prtGeneralCurrentOperator' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) for usage generalServicePerson(53), -- STRING - localized -- service person (responsible party and contact info) -- see 'prtGeneralServicePerson' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) for usage generalInputDefaultIndex(54), -- INTEGER - index or zero -- default input tray, i.e., 'isXxxAttributeValueIndex' -- see 'prtInputDefaultIndex' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) for usage generalOutputDefaultIndex(55), -- INTEGER - index or zero -- default output bin, i.e., 'isXxxAttributeValueIndex' -- see 'prtOutputDefaultIndex' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) for usage generalMarkerDefaultIndex(56), -- INTEGER - index or zero -- default marker, i.e., 'isXxxAttributeValueIndex' -- see 'prtMarkerDefaultIndex' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) for usage generalMediaPathDefaultIndex(57), -- INTEGER - index or zero -- default media path, i.e., 'isXxxAttributeValueIndex' -- see 'prtMediaPathDefaultIndex' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) for usage generalInputJobs(71), -- INTEGER - counter -- total input jobs received by system, service, or device generalOutputJobs(72), -- INTEGER - counter -- total output jobs sent by system, service, or device generalInputKOctets(73), -- INTEGER - counter -- total K octets received by system, service, or device generalOutputKOctets(74), -- INTEGER - counter -- total K octets sent by system, service, or device generalInputImages(75), -- INTEGER - counter -- total images received by system, service, or device generalOutputImages(76), -- INTEGER - counter -- total images sent by system, service, or device generalLocalFileKOctets(77), -- INTEGER - counter -- total data stored locally by system, service, or device generalNetworkFileKOctets(78), -- INTEGER - counter -- total data stored remotely by system, service, or device generalImpressions(81), -- INTEGER - counter -- total impressions printed by system, service, or device generalBlackImpressions(82), -- INTEGER - counter -- total black impressions printed by system, service, or -- device generalBlankImpressions(83), -- INTEGER - counter -- total blank impressions printed by system, service, or -- device (with no colorant, watermarks, forms, etc.) generalFullColorImpressions(84), -- INTEGER - counter -- total full color impressions printed by system, service, -- or device (with one or more non-black colorants, but not -- including highlight color impressions - see below) generalHighlightColorImpressions(85), -- INTEGER - counter -- total highlight color impressions printed by system, -- service, or device (with one spot non-black colorant, but -- not including full color impressions - see above) generalSheets(86), -- INTEGER - counter -- total media sheets that have passed by any marker on this -- system, service, or device (blank or impressed) generalBlankSheets(87), -- INTEGER - counter -- total blank sheets that have passed by any marker on this -- system, service, or device (without watermarks or forms) generalTwoSidedSheets(88), -- INTEGER - counter -- total media sheets with impressions printed on both sides -- on this system, service, or device generalBlackTwoSidedSheets(89), -- INTEGER - counter -- total media sheets with black impressions printed on both -- sides on this system, service, or device generalFullColorTwoSidedSheets(90), -- INTEGER - counter -- total media sheets with full color impressions printed on -- both sides on this system, service, or device generalHighlightColorTwoSidedSheets(91), -- INTEGER - counter -- total media sheets with highlight color impressions -- printed on both sides on this system, service, or device generalScanImages(92), -- INTEGER - counter -- total images scanned by system, service, or device generalScanBlackImages(93), -- INTEGER - counter -- total black images scanned by system, service, or device generalScanFullColorImages(94), -- INTEGER - counter -- total color images scanned by system, service, or device -- cover attributes coverInfo(101), -- STRING - localized -- cover description -- see 'prtCoverDescription' in Printer MIB v2 (RFC 3805) coverStatus(102), -- INTEGER - bit-mask -- cover status -- see 'prtCoverStatus' in Printer MIB v2 (RFC 3805) -- see 'PrtCoverStatusTC' in IANA Printer MIB -- input tray attributes inputType(151), -- INTEGER - enumeration -- input tray technology type (usually by feed mechanism) -- see 'prtInputType' in Printer MIB v2 (RFC 3805) -- see 'PrtInputTypeTC' in IANA Printer MIB inputMediaIndex(152), -- INTEGER - index or zero -- input tray currently loaded media index -- see 'prtInputMediaDimFeedDirChosen' in PM v1 (RFC 1759) -- see 'prtInputMediaDimXFeedDirChosen' in PM v1 (RFC 1759) inputMaxCapacity(153), -- INTEGER - upper bound -- input tray max capacity in sheets, etc. -- see 'isSystemMediaCapacityUnit' defined in this MIB -- see 'prtInputMaxCapacity' in PM v1 (RFC 1759) inputCurrentLevel(154), -- INTEGER - gauge -- input tray current level in sheets, etc. -- see 'isSystemMediaCapacityUnit' defined in this MIB -- see 'prtInputCurrentLevel' in PM v1 (RFC 1759) -- output bin attributes outputType(201), -- INTEGER - enumeration -- output bin technology type -- see 'prtOutputType' in Printer MIB v2 (RFC 3805) -- see 'PrtOutputTypeTC' in IANA Printer MIB -- marker attributes markerMarkTech(251), -- INTEGER - enumeration -- marker technology type -- see 'prtMarkerMarkTech' in Printer MIB v2 (RFC 3805) -- see 'PrtMarkerMarkTechTC' in IANA Printer MIB -- marker supplies attributes markerSuppliesMarkerIndex(301), -- INTEGER - index or zero -- value of 'XxxAttributeValueIndex' for associated marker -- see 'prtMarkerSuppliesMarkerIndex' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) -- marker colorant attributes markerColorantMarkerIndex(351), -- INTEGER - index or zero -- value of 'XxxAttributeValueIndex' for associated marker -- see 'prtMarkerColorantMarkerIndex' in Printer MIB v1 -- (RFC 1759) and Printer MIB v2 (RFC 3805) -- media path attributes mediaPathMaxSpeed(401), -- INTEGER - upper bound -- media path max speed in sheets, etc. -- see 'isSystemMediaPathSpeedUnit' defined in this MIB -- see 'prtMediaPathMaxSpeed' in PM v1 (RFC 1759) -- channel attributes channelType(451), -- INTEGER - enumeration -- channel type for receiving input jobs -- see 'prtChannelType' in Printer MIB v2 (RFC 3805) -- see 'PrtChannelTypeTC' in IANA Printer MIB -- interpreter attributes interpreterLangFamily(501), -- INTEGER - enumeration -- interpreter language family -- see 'prtInterpreterLangFamily' in PM v1 (RFC 1759) -- see 'PrtInterpreterLangFamilyTC' in IANA Printer MIB -- console display attributes -- console light attributes -- alert (???) attributes -- finisher attributes -- scanner attributes -- transform attributes reserved(2039) -- highest possible value } IsObjectClassTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The object class of this element on this Imaging System." SYNTAX INTEGER { other(1), -- non-standard object class unknown(2), -- unknown object class system(3), -- Imaging System service(4), -- managed service device(5), -- managed device resource(6), -- managed resource job(7), -- managed job document(8), -- managed document reserved(255) -- highest possible value } IsObjectFunctionTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The imaging function of this managed service or device (e.g., copy). Intentionally omitted are: (a) 'auxiliary' which is overhead of the 'processing' state of an ordinary service or device; (b) 'maintenance' which is the 'testing' state of an ordinary service or device; and (c) 'fileIn/fileOut' which are activities of the 'processing' state of an ordinary service or device. Note: This list is limited to 255 entries, by the size of 'isSystemServiceTypeSupport'." REFERENCE "See: 'JmJobServiceTypesTC' in Job Mon MIB (RFC 2707)." SYNTAX INTEGER { other(1), -- non-standard type unknown(2), -- unknown type copy(3), -- copy (scan and print) emailIn(4), -- email (input messages) emailOut(5), -- email (output messages) faxIn(6), -- fax (input images) faxOut(7), -- fax (output images) networkFaxIn(8), -- network fax (input images) networkFaxOut(9), -- network fax (output images) print(10), -- print (output impressions) scan(11), -- scan (output images) transform(12), -- transform (convert format) reserved(255) -- highest possible value } IsObjectStateTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The state of this managed system, service, or device." REFERENCE "See: 'printer-state' in IPP/1.1 Model (RFC 2911); 'hrDeviceStatus' in Host Resources MIB (RFC 2790)." SYNTAX INTEGER { other(1), -- non-standard state unknown(2), -- unknown state idle(3), -- no jobs are processing processing(4), -- jobs are processing stopped(5), -- intervention required testing(6), -- testing or maintenance down(7) -- unavailable for jobs } IsObjectStateReasonsTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The state reasons (conditions which qualify the state) of this managed system, service, or device, expressed as a bit-mask. Legal values are: other 0x01 -- other state reason unknown 0x02 -- unknown state reason mediaNeeded 0x04 -- an input tray is out of media mediaJammed 0x08 -- media jam on output device movingToPaused 0x10 -- Pause in progress paused 0x20 -- Pause completed shutdown 0x40 -- Shutdown completed connectingToDevice 0x80 -- Connect to device in progress timedOut 0x0001 -- Connect to device timed out stopping 0x0002 -- Stop device in progress stoppedPartly 0x0004 -- Some devices are stopped tonerLow 0x0008 -- Output device low on toner tonerEmpty 0x0010 -- Output device out of toner spoolAreaFull 0x0020 -- Job spooling storage is full coverOpen 0x0040 -- Device cover is open interlockOpen 0x0080 -- Device interlock is open doorOpen 0x0100 -- Device Door is open inputTrayMissing 0x0200 -- Input tray is missing mediaLow 0x0400 -- Input tray is low on media mediaEmpty 0x0800 -- Input tray is out of media Editor: 'mediaNeeded' and 'mediaEmpty' are REDUNDANT (delete the first and renumber? Or keep first and delete second(??). Combinations of several values are allowed and meaningful." REFERENCE "See: 'printer-state-reasons' in IPP/1.1 Model (RFC 2911); 'hrPrinterDetectedErrorState' in Host MIB (RFC 2790)." SYNTAX Integer32 IsTransformTypeTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The detailed type of this transform service." SYNTAX INTEGER { other(1), -- non-standard object class unknown(2), -- unknown object class imagesToText(3), -- images to text (OCR) -- (JPEG to UTF-8 plaintext) imagesToMarkup(4), -- images to markup -- (TIFF to MS Word) imagesToPages(5), -- images to PDL -- (TIFF to PDF) imagesToImages(6), -- images to other images -- (TIFF to JPEG) markupToMarkup(7), -- markup to other markup -- (MS Word to Word Perfect) markupToPages(8), -- markup to page def lang (PDL) -- (MS Word to PostScript) markupToImages(9), -- markup to images -- (MS Word to JPEG) pagesToMarkup(10), -- PDL to markup -- (PostScript to MS Word) pagesToPages(11), -- PDL to other PDL -- (PostScript to PDF) pagesToImages(12), -- PDL to images -- (PostScript to JPEG) reserved(255) -- highest possible value } -- -- System Group (Mandatory) -- isSystem OBJECT IDENTIFIER ::= { isMIBObjects 1 } isSystemTable OBJECT-TYPE SYNTAX SEQUENCE OF IsSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of global info for this Imaging System." REFERENCE "See: 'prtGeneralTable' in Printer MIB v1 (RFC 1759) and Printer MIB v2 (RFC 3805)." ::= { isSystem 1 } isSystemEntry OBJECT-TYPE SYNTAX IsSystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of global info for this Imaging System. Usage: The value of 'isSystemIndex' MUST always be '1'." REFERENCE "See: 'prtGeneralEntry' in Printer MIB v2 (RFC 1759) and Printer MIB v2 (RFC 3805)." INDEX { isSystemIndex } ::= { isSystemTable 1 } IsSystemEntry ::= SEQUENCE { -- System key element isSystemIndex Integer32, -- System status elements isSystemState IsObjectStateTC, isSystemStateReasons IsObjectStateReasonsTC, isSystemTotalAlerts Counter32, isSystemServiceAlerts Counter32, isSystemDeviceAlerts Counter32, isSystemConfiguredServices Gauge32, isSystemConfiguredDevices Gauge32, isSystemConfigurationChanges Counter32, -- System description elements isSystemLocaleIndex Integer32, isSystemInfo SnmpAdminString, isSystemManagementURI SnmpAdminString, isSystemActionTypeSupport OCTET STRING, isSystemAttributeTypeSupport OCTET STRING, isSystemServiceTypeSupport OCTET STRING, isSystemDeviceTypeSupport OCTET STRING, isSystemResourceTypeSupport OCTET STRING, isSystemAddressabilityUnit Integer32, isSystemMediaCapacityUnit Integer32, isSystemMediaDimensionUnit Integer32, isSystemMediaPathSpeedUnit Integer32, isSystemSWInstalledIndexOrZero Integer32, isSystemJobSetIndexOrZero Integer32 } -- -- System key element -- isSystemIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique key of this conceptual row in 'isSystemTable'. Usage: The value of 'isSystemIndex' MUST always be '1'." DEFVAL { 1 } ::= { isSystemEntry 1 } -- -- System status elements -- isSystemState OBJECT-TYPE SYNTAX IsObjectStateTC MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this Imaging System (e.g., idle)." REFERENCE "See: 'printer-state' in IPP/1.1 Model (RFC 2911); 'hrDeviceStatus' in Host Resources MIB (RFC 2790)." ::= { isSystemEntry 2 } isSystemStateReasons OBJECT-TYPE SYNTAX IsObjectStateReasonsTC MAX-ACCESS read-only STATUS current DESCRIPTION "The state reasons (conditions) of this Imaging System." REFERENCE "See: 'printer-state-reasons' in IPP/1.1 Model (RFC 2911); 'hrPrinterDetectedErrorState' in Host MIB (RFC 2790)." ::= { isSystemEntry 3 } isSystemTotalAlerts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total system, service, or device alerts that have occurred on this Imaging System." ::= { isSystemEntry 4 } isSystemServiceAlerts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total service alerts that have occurred on this Imaging System." ::= { isSystemEntry 5 } isSystemDeviceAlerts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total device alerts that have occurred on this Imaging System." ::= { isSystemEntry 6 } isSystemConfiguredServices OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Configured (possibly active) services on this Imaging System, i.e., the count of rows currently in 'isServiceTable'." ::= { isSystemEntry 7 } isSystemConfiguredDevices OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Configured (possibly active) devices on this Imaging System, i.e., the count of rows currently in 'isDeviceTable'." ::= { isSystemEntry 8 } isSystemConfigurationChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total configuration changes that have occurred on this Imaging System (changes to one or more elements or attributes)." ::= { isSystemEntry 9 } -- -- System description elements -- isSystemLocaleIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of 'isLocaleIndex' that identifies the current locale on this Imaging System, or zero if unknown locale." REFERENCE "See: 'isLocaleIndex' defined in this MIB." ::= { isSystemEntry 10 } isSystemInfo OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of this Imaging System, for use with remote network management scripts and GUIs." ::= { isSystemEntry 11 } isSystemManagementURI OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A management URI for this Imaging System, for use with remote network management stations, e.g., 'snmp://example.com:161' or 'pwg-wbmm://example.com/galaxy'." ::= { isSystemEntry 12 } isSystemActionTypeSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) -- 256 bits MAX-ACCESS read-only STATUS current DESCRIPTION "A bit-array of action types supported on this Imaging System. Usage: This bit-array is constructed from the set of supported values for 'isManagementActionType', used as powers of 2 with big-endian rules - the high-order bit of the first octet corresponds to a service type of '0' (reserved) - the low-order bit of the first octet corresponds to a service type of '7'. Similar to the BITS pseudotype defined in IETF SMIv2 (RFC 2578), which has the same bit ordering rules but requires definitions for contiguous enumerated bits." REFERENCE "See: 'isManagementActionType' defined in this MIB; 'IsObjectFunctionTC' defined in this MIB; Section 7.1.4 'The BITS construct' in RFC 2578; Section 8 'Serialization using the BER' in RFC 3417." ::= { isSystemEntry 13 } isSystemAttributeTypeSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) -- 2040 bits MAX-ACCESS read-only STATUS current DESCRIPTION "A bit-array of attributes supported on this Imaging System, i.e., supported values of 'isSystemAttributeTypeIndex', or 'isServiceAttributeTypeIndex', or 'isDeviceAttributeTypeIndex'. Usage: See 'isSystemActionTypeSupport' element for usage." REFERENCE "See: 'IsObjectAttributeTypeTC' defined in this MIB." ::= { isSystemEntry 14 } isSystemServiceTypeSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) -- 256 bits MAX-ACCESS read-only STATUS current DESCRIPTION "A bit-array of service types supported on this Imaging System, i.e., supported values of 'isServiceType'. Some service types may not be currently configured on this Imaging System. Usage: See 'isSystemActionTypeSupport' element for usage." REFERENCE "See: 'isServiceType' defined in this MIB; 'IsObjectFunctionTC' defined in this MIB." ::= { isSystemEntry 15 } isSystemDeviceTypeSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) -- 256 bits MAX-ACCESS read-only STATUS current DESCRIPTION "A bit-array of device types supported on this Imaging System, i.e., supported values of 'isDeviceType'. Some device types may not be currently configured on this Imaging System. Usage: See 'isSystemActionTypeSupport' element for usage." REFERENCE "See: 'isDeviceType' defined in this MIB; 'IsObjectFunctionTC' defined in this MIB." ::= { isSystemEntry 16 } isSystemResourceTypeSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) -- 256 bits MAX-ACCESS read-only STATUS current DESCRIPTION "A bit-array of resource types supported on this Imaging System, i.e., supported values of 'isResourceType'. Some resource types may not be currently configured on this Imaging System. Usage: See 'isSystemActionTypeSupport' element for usage." REFERENCE "See: 'isResourceType' defined in this MIB; 'IsResourceTypeTC' defined in this MIB." ::= { isSystemEntry 17 } isSystemAddressabilityUnit OBJECT-TYPE SYNTAX Integer32 -- PrtMarkerAddressabilityUnitTC MAX-ACCESS read-only STATUS current DESCRIPTION "The unit of measure of distances for scanner, interpreter, and marker resolutions on this Imaging System." REFERENCE "See: 'PrtMarkerAddressabilityUnitTC' in Printer MIB v2." ::= { isSystemEntry 18 } isSystemMediaCapacityUnit OBJECT-TYPE SYNTAX Integer32 -- PrtCapacityUnitTC MAX-ACCESS read-only STATUS current DESCRIPTION "The unit of measure for media capacity for input trays and output bins on this Imaging System." REFERENCE "See: 'PrtCapacityUnitTC' in Printer MIB v2." ::= { isSystemEntry 19 } isSystemMediaDimensionUnit OBJECT-TYPE SYNTAX Integer32 -- PrtMediaUnitTC MAX-ACCESS read-only STATUS current DESCRIPTION "The unit of measure for media dimensions for input trays, output bins, and media paths on this Imaging System." REFERENCE "See: 'PrtMediaPathMaxSpeedPrintUnitTC' in Printer MIB v2." ::= { isSystemEntry 20 } isSystemMediaPathSpeedUnit OBJECT-TYPE SYNTAX Integer32 -- PrtMediaPathMaxSpeedPrintUnitTC MAX-ACCESS read-only STATUS current DESCRIPTION "The unit of measure for specifying the speed of all media paths on this Imaging System." REFERENCE "See: 'PrtMediaPathMaxSpeedPrintUnitTC' in Printer MIB v2." ::= { isSystemEntry 21 } isSystemSWInstalledIndexOrZero OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of 'hrSWInstalledIndex' in the Host Resources MIB (RFC 2790) for the executable software for this Imaging System, or zero if none." REFERENCE "See: 'hrSWInstalledIndex' in Host Resources MIB (RFC 2790)." ::= { isSystemEntry 22 } isSystemJobSetIndexOrZero OBJECT-TYPE SYNTAX Integer32 (0..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of 'jmGeneralJobSetIndex' in the Job Mon MIB (RFC 2707) for the job set (queue) for this Imaging System, or zero if none. Note: The Job Mon MIB limits this index to 16-bit width." REFERENCE "See: 'jmGeneralJobSetIndex' in Job Mon MIB (RFC 2707)." ::= { isSystemEntry 23 } -- Below here, move these into System Counter group (attributes) isSystemMarkerSheets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total sheets of media that have passed by any marker on this Imaging System." ::= { isSystem 20 } isSystemMarkerBlankSheets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total sheets of media that have passed (without any colorant placed on either side of the sheet of media) by any marker on this Imaging System." ::= { isSystem 21 } -- -- System Attribute Group (Mandatory) -- isSystemAttribute OBJECT IDENTIFIER ::= { isMIBObjects 2 } isSystemAttributeTable OBJECT-TYPE SYNTAX SEQUENCE OF IsSystemAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of attributes (sorted by type and value indices) of this Imaging System." REFERENCE "See: 'jmAttributeTable' in Job Mon MIB (RFC 2707)." ::= { isSystemAttribute 1 } isSystemAttributeEntry OBJECT-TYPE SYNTAX IsSystemAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for an attribute (sorted by type and value indices) of this Imaging System." INDEX { isSystemAttributeTypeIndex, isSystemAttributeValueIndex } ::= { isSystemAttributeTable 1 } IsSystemAttributeEntry ::= SEQUENCE { -- System Attribute key elements isSystemAttributeTypeIndex IsObjectAttributeTypeTC, isSystemAttributeValueIndex Integer32, -- System Attribute description elements isSystemAttributeIntegerValue Integer32, isSystemAttributeStringValue SnmpAdminString } -- -- System Attribute key elements -- isSystemAttributeTypeIndex OBJECT-TYPE SYNTAX IsObjectAttributeTypeTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Value of 'IsObjectAttributeTypeTC' that is the primary key for this conceptual row in 'isSystemAttributeTable'." REFERENCE "See: 'IsObjectAttributeTypeTC' defined in this MIB; 'jmAttributeTypeIndex' in Job Mon MIB (RFC 2707)." ::= { isSystemAttributeEntry 1 } -- -- System Attribute description elements -- isSystemAttributeValueIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The attribute value index that is the secondary key for this conceptual row in 'isSystemAttributeTable'. Usage: This secondary key supports multi-valued attributes and parallel attributes (e.g., 'input...' tray attributes)." REFERENCE "See: 'IsObjectAttributeTypeTC' defined in this MIB; 'jmAttributeInstanceIndex' in Job Mon MIB (RFC 2707)." ::= { isSystemAttributeEntry 2 } isSystemAttributeIntegerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 32-bit signed integer value of this attribute." REFERENCE "See: 'jmAttributeValueAsInteger' in Job Mon MIB (RFC 2707)." ::= { isSystemAttributeEntry 3 } isSystemAttributeStringValue OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The UTF-8 (RFC 3629) string value of this attribute." REFERENCE "See: 'jmAttributeValueAsString' in Job Mon MIB (RFC 2707)." ::= { isSystemAttributeEntry 4 } -- -- Service Group (Mandatory) -- isService OBJECT IDENTIFIER ::= { isMIBObjects 3 } isServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF IsServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of services currently configured and (possibly) active on this Imaging System." ::= { isService 1 } isServiceEntry OBJECT-TYPE SYNTAX IsServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for one service currently configured and (possibly) active on this Imaging System." INDEX { isServiceIndex } ::= { isServiceTable 1 } IsServiceEntry ::= SEQUENCE { -- Service key element isServiceIndex Integer32, -- Service status elements isServiceState IsObjectStateTC, isServiceStateReasons IsObjectStateReasonsTC, -- Service description elements isServiceType IsObjectFunctionTC, isServiceName SnmpAdminString, isServiceInfo SnmpAdminString, isServiceManagementURI SnmpAdminString, isServiceAttributeTypeSupport OCTET STRING, isServiceSWInstalledIndexOrZero Integer32, isServiceJobSetIndexOrZero Integer32 } -- -- Service key element -- isServiceIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique key of this conceptual row in 'isServiceTable'." ::= { isServiceEntry 1 } -- -- Service status elements -- isServiceState OBJECT-TYPE SYNTAX IsObjectStateTC MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this managed service (e.g., idle)." REFERENCE "See: 'printer-state' in IPP/1.1 Model (RFC 2911); 'hrDeviceStatus' in Host Resources MIB (RFC 2790)." ::= { isServiceEntry 2 } isServiceStateReasons OBJECT-TYPE SYNTAX IsObjectStateReasonsTC MAX-ACCESS read-only STATUS current DESCRIPTION "The state reasons (conditions) of this managed service." REFERENCE "See: 'printer-state-reasons' in IPP/1.1 Model (RFC 2911); 'hrPrinterDetectedErrorState' in Host MIB (RFC 2790)." ::= { isServiceEntry 3 } -- -- Service description elements -- isServiceType OBJECT-TYPE SYNTAX IsObjectFunctionTC MAX-ACCESS read-only STATUS current DESCRIPTION "The imaging function of this managed service (e.g., copy)." REFERENCE "See: 'JmJobServiceTypesTC' in Job Mon MIB (RFC 2707)." ::= { isServiceEntry 4 } isServiceName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "The friendly locally unique name for this managed service, for use with remote network management scripts and GUIs. For example: 'building-232-print'." ::= { isServiceEntry 5 } isServiceInfo OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of this managed service, for use with remote network management scripts and GUIs. For example: 'Print service supporting IPP and PSI'." ::= { isServiceEntry 6 } isServiceManagementURI OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "A management URI for this service, for use with remote network management stations, e.g., 'snmp://example.com:161' or 'pwg-wbmm://example.com/print'." ::= { isServiceEntry 7 } isServiceAttributeTypeSupport OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) -- 2040 bits MAX-ACCESS read-only STATUS current DESCRIPTION "A bit-array of attributes supported on this managed service. i.e., supported values of 'isServiceAttributeTypeIndex'. Usage: See 'isSystemActionTypeSupport' element for usage." REFERENCE "See: 'IsObjectAttributeTypeTC' defined in this MIB; 'isServiceAttributeTypeIndex' defined in this MIB." ::= { isServiceEntry 8 } isServiceSWInstalledIndexOrZero OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of 'hrSWInstalledIndex' in the Host Resources MIB (RFC 2790) for the executable software for this managed service, or zero if none." REFERENCE "See: 'hrSWInstalledIndex' in Host Resources MIB (RFC 2790)." ::= { isServiceEntry 9 } isServiceJobSetIndexOrZero OBJECT-TYPE SYNTAX Integer32 (0..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of 'jmGeneralJobSetIndex' in the Job Mon MIB (RFC 2707) for the job set (queue) for this managed service, or zero if none. Note: The Job Mon MIB limits this index to 16-bit width." REFERENCE "See: 'jmGeneralJobSetIndex' in Job Mon MIB (RFC 2707)." ::= { isServiceEntry 10 } -- -- Service Attribute Group (Mandatory) -- isServiceAttribute OBJECT IDENTIFIER ::= { isMIBObjects 4 } isServiceAttributeTable OBJECT-TYPE SYNTAX SEQUENCE OF IsServiceAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of attributes (sorted by service, type, and value indices) of services currently configured and (possibly) active on this Imaging System." REFERENCE "See: 'jmAttributeTable' in Job Mon MIB (RFC 2707)." ::= { isServiceAttribute 1 } isServiceAttributeEntry OBJECT-TYPE SYNTAX IsServiceAttributeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for an attribute (sorted by service, type, and value indices) of a service currently configured and (possibly) active on this Imaging System." INDEX { isServiceAttributeServiceIndex, isServiceAttributeTypeIndex, isServiceAttributeValueIndex } ::= { isServiceAttributeTable 1 } IsServiceAttributeEntry ::= SEQUENCE { -- Service Attribute key elements isServiceAttributeServiceIndex Integer32, isServiceAttributeTypeIndex IsObjectAttributeTypeTC, isServiceAttributeValueIndex Integer32, -- Service Attribute description elements isServiceAttributeIntegerValue Integer32, isServiceAttributeStringValue SnmpAdminString } -- -- Service Attribute key elements -- isServiceAttributeServiceIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Value of 'isServiceIndex' that is the primary key for this conceptual row in 'isServiceAttributeTable'." REFERENCE "See: 'isServiceIndex' defined in this MIB." ::= { isServiceAttributeEntry 1 } isServiceAttributeTypeIndex OBJECT-TYPE SYNTAX IsObjectAttributeTypeTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "Value of 'IsObjectAttributeTypeTC' that is the secondary key for this conceptual row in 'isServiceAttributeTable'." REFERENCE "See: 'IsObjectAttributeTypeTC' defined in this MIB; 'jmAttributeTypeIndex' in Job Mon MIB (RFC 2707)." ::= { isServiceAttributeEntry 2 } isServiceAttributeValueIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The attribute value index that is the tertiary key for this conceptual row in 'isServiceAttributeTable'. Usage: This tertiary key supports multi-valued attributes and parallel attributes (e.g., 'input...' tray attributes)." REFERENCE "See: 'IsObjectAttributeTypeTC' defined in this MIB; 'jmAttributeInstanceIndex' in Job Mon MIB (RFC 2707)." ::= { isServiceAttributeEntry 3 } -- -- Service Attribute description elements -- isServiceAttributeIntegerValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 32-bit signed integer value of this attribute." REFERENCE "See: 'jmAttributeValueAsInteger' in Job Mon MIB (RFC 2707)." ::= { isServiceAttributeEntry 4 } isServiceAttributeStringValue OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The UTF-8 (RFC 3629) string value of this attribute." REFERENCE "See: 'jmAttributeValueAsString' in Job Mon MIB (RFC 2707)." ::= { isServiceAttributeEntry 5 } -- -- Locale Group (Mandatory) -- isLocale OBJECT IDENTIFIER ::= { isMIBObjects 7 } isLocaleTable OBJECT-TYPE SYNTAX SEQUENCE OF IsLocaleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of locales (languages spoken in countries or regions) supported by this Imaging System for server-side localization of 'xxxInfo' and 'xxxMessage' elements and attributes configured on this Imaging System." REFERENCE "See: 'prtLocalizationTable' in Printer MIB v2 (RFC 3805); 'PrtLocalizedDescriptionStringTC' and 'PrtConsoleDescriptionStringTC' in Printer MIB v2." ::= { isLocale 1 } isLocaleEntry OBJECT-TYPE SYNTAX IsLocaleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a locale (language spoken in a country or region) supported by this Imaging System for server-side localization of 'xxxInfo' and 'xxxMessage' elements and attributes configured on this Imaging System." INDEX { isLocaleIndex } ::= { isLocaleTable 1 } IsLocaleEntry ::= SEQUENCE { -- Locale key element isLocaleIndex Integer32, -- Locale description elements isLocaleInfo SnmpAdminString, isLocaleLanguageTag SnmpAdminString } -- -- Locale key elements -- isLocaleIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique key of this conceptual row in 'isLocaleTable'." REFERENCE "See: 'isSystemLocaleIndex' defined in this MIB." ::= { isLocaleEntry 1 } -- -- Locale description elements -- isLocaleInfo OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of this locale, for use with remote network management scripts and GUIs." ::= { isLocaleEntry 2 } isLocaleLanguageTag OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..63)) MAX-ACCESS read-only STATUS current DESCRIPTION "A 'language tag' (as defined in RFC 3066) for this locale, which MUST identify a natural language (such as German) and MAY identify the country or region where the language is spoken. Note: A 'charset' (RFC 2978) suffix as used in POSIX (ISO 9945) locales is not needed, because localized strings in this MIB are specified as invariant UTF-8 (RFC 3629) via 'SnmpAdminString'." REFERENCE "See: 'Tags for the Identification of Languages' (RFC 3066); 'Codes for Names of Languages' (ISO 639); 'Codes for Names of Countries' (ISO 3166). 'IETF Policy on Charsets and Languages' (RFC 2277)." ::= { isLocaleEntry 3 } -- -- Alert Group (Mandatory) -- isAlert OBJECT IDENTIFIER ::= { isMIBObjects 8 } isAlertTable OBJECT-TYPE SYNTAX SEQUENCE OF IsAlertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of all critical and warning alerts currently active on this Imaging System." REFERENCE "See: 'prtAlertTable' in Printer MIB v1 (RFC 1759) and Printer MIB v2 (RFC 3805)." ::= { isAlert 1 } isAlertEntry OBJECT-TYPE SYNTAX IsAlertEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for a critical or warning alert currently active on this Imaging System." REFERENCE "See: 'prtAlertEntry' in Printer MIB v1 (RFC 1759) and Printer MIB v2 (RFC 3805)." INDEX { isAlertIndex } ::= { isAlertTable 1 } IsAlertEntry ::= SEQUENCE { -- Alert key element isAlertIndex Integer32, -- Alert status elements isAlertSeverityLevel IsAlertSeverityLevelTC, isAlertTrainingLevel IsAlertTrainingLevelTC, isAlertPersistence StorageType, isAlertDate DateAndTime, isAlertTime TimeTicks, -- Alert description elements isAlertSourceObjectClass IsObjectClassTC, isAlertSourceObjectIndex Integer32, isAlertAttributeTypeIndex Integer32, isAlertAttributeValueIndex Integer32, isAlertLocation Integer32, isAlertCode Integer32, isAlertDescription SnmpAdminString } -- -- Alert key element -- isAlertIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique key of this conceptual row in 'isAlertTable'." DEFVAL { 1 } ::= { isAlertEntry 1 } -- -- Alert status elements -- isAlertSeverityLevel OBJECT-TYPE SYNTAX IsAlertSeverityLevelTC MAX-ACCESS read-only STATUS current DESCRIPTION "The level of severity of this alert." REFERENCE "See: 'prtAlertSeverityLevel' in Printer MIB v2 (RFC 3805); 'PrtAlertSeverityLevelTC' in Printer MIB v2." ::= { isAlertEntry 2 } isAlertTrainingLevel OBJECT-TYPE SYNTAX IsAlertTrainingLevelTC MAX-ACCESS read-only STATUS current DESCRIPTION "The level of training required to correct this alert." REFERENCE "See: 'prtAlertTrainingLevel' in Printer MIB v2 (RFC 3805); 'PrtAlertTrainingLevelTC' in IANA Printer MIB." ::= { isAlertEntry 3 } isAlertPersistence OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-only STATUS current DESCRIPTION "The persistence of this conceptual row in 'isAlertTable'." REFERENCE "See: 'StorageType' in SMIv2 Textual Conventions (RFC 2579)." ::= { isAlertEntry 4 } isAlertDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The create date/time of this conceptual row in 'isAlertTable'." REFERENCE "See: 'DateAndTime' in SMIv2 Textual Conventions (RFC 2579)." ::= { isAlertEntry 5 } isAlertTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The create time of this conceptual row in 'isAlertTable'." REFERENCE "See: 'prtAlertTime' in Printer MIB v1 (RFC 1759) and Printer MIB v2 (RFC 3805)." ::= { isAlertEntry 6 } -- -- Alert description elements -- isAlertSourceObjectClass OBJECT-TYPE SYNTAX IsObjectClassTC MAX-ACCESS read-only STATUS current DESCRIPTION "The source object class (i.e., value of 'IsObjectClassTC') for this alert." REFERENCE "See: 'IsObjectClassTC' defined in this MIB." ::= { isAlertEntry 7 } isAlertSourceObjectIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The source object index (i.e., value of 'isSystemIndex', etc.) for this alert, or zero if none." ::= { isAlertEntry 8 } isAlertAttributeTypeIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The source attribute type index (i.e., value of 'is...AttributeTypeIndex') for this alert, or zero if none." ::= { isAlertEntry 9 } isAlertAttributeValueIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The source attribute value index (i.e., value of 'is...AttributeValueIndex') for this alert, or zero if none." ::= { isAlertEntry 10 } isAlertLocation OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The location (refines source, attribute type, attribute value) for this alert, or zero if none." REFERENCE "See: 'prtAlertLocation' in Printer MIB v1 (RFC 1759) and Printer MIB v2 (RFC 3805)." ::= { isAlertEntry 11 } isAlertCode OBJECT-TYPE SYNTAX Integer32 -- PrtAlertCodeTC MAX-ACCESS read-only STATUS current DESCRIPTION "The code that describes the detailed type of this alert. Usage: Refined by the values of 'isAlertSeverityLevel' and 'isAlertTrainingLevel'." REFERENCE "See: 'prtAlertCode' in Printer MIB v1 (RFC 1759) and 'PrtAlertCodeTC' in IANA Printer MIB." ::= { isAlertEntry 12 } isAlertDescription OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The detailed description of this Imaging System alert for use with remote network management scripts and GUIs." REFERENCE "See: 'prtAlertDescription' in Printer MIB v2 (RFC 3805)." ::= { isAlertEntry 13 } -- -- Management Group (Optional) -- isManagement OBJECT IDENTIFIER ::= { isMIBObjects 11 } isManagementTable OBJECT-TYPE SYNTAX SEQUENCE OF IsManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of exactly one management action currently in progress or previously completed on this Imaging System." ::= { isManagement 1 } isManagementEntry OBJECT-TYPE SYNTAX IsManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for one management action currently in progress or previously completed on this Imaging System. Usage: The value of 'isManagementIndex' MUST always be '1'." INDEX { isManagementIndex } ::= { isManagementTable 1 } IsManagementEntry ::= SEQUENCE { -- Management key element isManagementIndex Integer32, -- Management status elements isManagementActionSerialNo TestAndIncr, isManagementActionStatus IsActionStatusTC, -- Management description elements isManagementActionType IsActionTypeTC, isManagementActionParameters SnmpAdminString, isManagementTargetClass IsObjectClassTC, isManagementTargetIndex Integer32, isManagementTargetJobIndex Integer32 } -- -- Management key element -- isManagementIndex OBJECT-TYPE SYNTAX Integer32 (1..1) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Unique key of this conceptual row in 'isManagementTable'. Usage: The value of 'isManagementIndex' MUST always be '1'." DEFVAL { 1 } ::= { isManagementEntry 1 } -- -- Management status elements -- isManagementActionSerialNo OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "An advisory lock used to allow several cooperating management stations to coordinate their of use of management actions in this Imaging System MIB, by contending for this spin lock. Usage: Management stations that perform management actions via this Imaging System MIB, MUST first read the value of 'isManagementActionSerialNo' and 'isManagementActionStatus' (to ensure that a previous action is not still in progress). If a previous action is in progress, then the cooperating management station MUST wait a short random period and MUST read 'isManagementActionSerialNo' and 'isManagementActionStatus' again. If no previous action is in progress, then the cooperating management station MUST simultaneously set: 'isManagementActionSerialNo' - action spin lock 'isManagementActionType' - e.g., 'restart' 'isManagementActionParameters' - e.g., '' 'isManagementActionTargetClass' - e.g., 'service' 'isManagementActionTargetIndex' - e.g., '6' 'isManagementActionTargetJobIndex' - for job management (which causes the Imaging System to change the value of 'isManagementActionStatus' to 'inProgress')." REFERENCE "See: 'ifTestId' in Interfaces Group MIB (RFC 2863); 'snmpSetSerialNo' in SNMPv2 MIB (RFC 3418); User-based Security Model for SNMP (RFC 3414); View-based Access Control Model for SNMP (RFC 3415)." ::= { isManagementEntry 2 } isManagementActionStatus OBJECT-TYPE SYNTAX IsActionStatusTC MAX-ACCESS read-only STATUS current DESCRIPTION "Status of management action now in progress or last completed on this Imaging System." REFERENCE "See: IPP System Admin." ::= { isManagementEntry 3 } -- -- Management description elements -- isManagementActionType OBJECT-TYPE SYNTAX IsActionTypeTC MAX-ACCESS read-write STATUS current DESCRIPTION "Type of management action now in progress or last completed on this Imaging System." REFERENCE "See: IPP System Admin." ::= { isManagementEntry 4 } isManagementActionParameters OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "List of management action parameters (if any) for the current management action now in progress or last completed on this Imaging System, in a UTF-8 (RFC 3629) string. Usage: This string parameter list must conform to the ABNF [tag '=' value] *[';' tag '=' value] where, 'tag' is an ASN.1 tag (e.g., 'jmJobIndex' from (RFC2707)) 'value' is a string encoded value (e.g., '23'). for example, 'jmJobIndex=23' is a valid string." REFERENCE "See: IPP System Admin." ::= { isManagementEntry 5 } isManagementTargetClass OBJECT-TYPE SYNTAX IsObjectClassTC MAX-ACCESS read-write STATUS current DESCRIPTION "The target object class (i.e., value of 'IsObjectClassTC') for the current management action now in progress or last completed on this Imaging System." REFERENCE "See: 'IsObjectClassTC' defined in this MIB." ::= { isManagementEntry 6 } isManagementTargetIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of 'isSystemIndex' for the target system or the value of 'isServiceIndex' for the target service or the value of 'isDeviceIndex' for the target device or the value of 'isResourceIndex' for the target resource for the current management action now in progress or last completed on this Imaging System." ::= { isManagementEntry 7 } isManagementTargetJobIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "Value of 'jmJobIndex' for the target job for the current job management action now in progress or last completed on this Imaging System, or zero if none. Usage: Depending on the value of 'isManagementTargetClass', 'isSystemJobSetIndexOrZero', or 'isServiceJobSetIndexOrZero', or 'isDeviceJobSetIndexOrZero' is available to resolve references to rows in 'jmJobTable'." REFERENCE "See: 'jmJobIndex' in Job Mon MIB (RFC 2707)." ::= { isManagementEntry 8 } END